Tensabarrier 889MAG Stanchion with Magnetic Base

Features & Benefits

• The magnetic base locates onto a floor plate that is attached to any surfaceusing a high strength adhesive.
• A locating mechanism is built into the bottom of the base allowing for it tolocate centrally onto the floor plate, this means:
• The posts can be placed quickly in a straight line – saving time.
• A more solid barrier than a free-standing post – meaning it cannoteasily be knocked out of the queue formation in high footfall areas.
• The floor plates mark out the queue layout, saving time if the queue formation needs to be re-configured or the posts replaced if they are removed.
• When the magnetic base is connected to the floor plate it takes a force of approx. 551lbs to lift vertically.
• The floor plate is less of a trip hazard due to its bevelled edge. It can easily be removed & re-located from the surface it is attached to, without causing damage.
• The base can be connected to any metal Tensabarrier® post with single or dual line webbing.

Product Specifications

Base & Magnets

• Lightweight injected mould base.
• Machined locating lug to ensure accurate alignment of the base to the floorplate.
• 6 of magnets are positioned around the base center.
• Magnets are mechanically fixed into the base, and held in place with highstrength retaining compound.
• The base can be assembled onto any standard metal Tensabarrier® post.

Base Cover

• Option of painted mild steel, polished or brushed stainless steel to matchpost specifications.

Floor Plate

• The floor plate is fixed to the required surface using a high strength doublesided acrylic self-adhesive bonding pad.
• Manufactured with a bevelled edge to ensure that the floor plate isn’t a triphazard when the post and base are not in place.
• Can be easily removed & re-located if required, without damaging the floor.
• Available with fixing holes for installing on uneven surfaces.